| S.No | Year of publication | Title | Name of the author/s | Department of the teacher | Name of journal | ISSN number | Link to the recognition in UGC enlistment of the Journal |
| 1 | 2018-19 | Study of Combined Effect of Inclination and Partial Fins on Melting of Phase Change Material in A Rectangular Enclosure Using CFD | D. Kondala Rao, Srinivas Kolla, C.Tara Sasanka, D.Sameer Kumar | Mechanical Engineering | Journal of Modelling and Simulation of Materials (JMSM) | 2582-2365 | |
| 2 | 2018-19 | Estimation of High Cycle Fatigue Life of AZ91E-Ni Coated Al2O3 Particulate Nano Composites Using Reliability Based Approach | Sameer Kumar Devarakonda, Naga Sai Suman Koka | Mechanical Engineering | Journal of The Institution of Engineers (India): Series D | 2250-2130 | https://www.scopus.com/sourceid/21100831406 |
| 3 | 2018-19 | Influence of Different Steam Cooling Techniques for High Pressure Turbine Blades on the Performance of Gas Turbine | Tara Chand V, Ravindra K, Bala Prasad K, Niranjan Kumar | Mechanical Engineering | Iranian Journal of Energy & Environment | 2079-2115 | |
| 4 | 2018-19 | Exergy assessment of air film blade cooled combined power cycle plant | Tarachand V, Ravindra K, Bala Prasad K | Mechanical Engineering | International Journal of Ambient Energy | 0143-0750 | https://www.scopus.com/sourceid/26672 |
| 5 | 2018-19 | Design and Finite Element Analysis of Disc Brake with different materials for passenger car | Snehita K, Tara Sasanka C, and K.G.S.V.Manikanta | Mechanical Engineering | International Journal for Research Trends and Innovation | 2456-3315 | |
| 6 | 2018-19 | Ceramic Tool Condition Monitoring in Machining of Inconel 718 IN | D. Kondala Rao, Srinivas Kolla | Mechanical Engineering | Int. J. Sci. Res. in Network Security and Communication | 2321-3256 | |
| 7 | 2018-19 | An analysis of feature identification for tool wear monitoring by using acoustic emission | D. Kondala Rao, Srinivas Kolla | Mechanical Engineering | Traitement du signal | 1958-5608 | https://www.scopus.com/sourceid/21100212114 |
| 8 | 2018-19 | Characterisation of Continuous GFRP Composites using Digital Image Correlation (DIC) Technique Journal | L Lakshmi Aparna, G Chaitanya, K Srinivas | Mechanical Engineering | International Journal for Innovative Research in Science and Technology | 2349-6010 | |
| 9 | 2018-19 | Prediction of Process Parameters In Turning of Titanium Alloys Using Response Surface Methodology | G. Chaitanya Siva koteswararao K | Mechanical Engineering | International Journal of Mechanical and Production Engineering Research and Development | 2249-6890 | https://www.scopus.com/sourceid/21100814505 |
| 10 | 2018-19 | Optimum Technique for Investigations of Machining Parameters in Titanium (Grade5) Alloy Turning the Use of Carbide Tip Tools in | G. Chaitanya Siva koteswararao Katta | Mechanical Engineering | Journal American Journal of Mechanical and Industrial Engineering | 2575-6070 | |
| 11 | 2018-19 | A Novel Approach of Turning on Titanium (Ti-6AL-4V) Alloy using NFGMT Coupled with GRA, PCA, and RSM | Sivakoteswararao Katta, G Chaitanya, B Ravi Shankar | Mechanical Engineering | Journal i-Manager's Journal on Mechanical Engineering | 2249-0744 | |
| 12 | 2018-19 | Investigations of influence of drill geometry and thrust force during drilling of Aluminium 2014 alloy on burr formation through design of experiments and neural network, | Reddy Sreenivasulu&Ch.Srinivasa Rao | Mechanical Engineering | Technological Engineering, (De Gruyter) | 2455-8761 | |
| 13 | 2018-19 | Parametric Design and Analysis of Four Wheeled Car Bumper Using CATIA & ANSYS | Reddy Sreenivasulu, K.Kamal Charan, R.Ramanjaneyulu, L. Murali Krishna, L. Sai Krishna, L. Jagadeesh | Mechanical Engineering | International Journal of Recent Engineering Research and Development (IJRERD) | 1336-5967 | |
| 14 | 2018-19 | Experimental studies of Mechanical and Tribological roperties on Aluminium Composite Reinforced With Coconut Shell Ash Particulates , | Siva Sankara Raju, G.Srinivasa Rao, and S.B.Venkata Siva, | Mechanical Engineering | International Journal of Materials Engineering Innovation (IJMATEI), | 1757-2754 | https://www.scopus.com/sourceid/17800156732 |
| 15 | 2018-19 | Optimization of Tribological Behaviour On Al-Coconut Shell Ash Composite at Elevated Temperature , | R Siva Sankara Raju, M K Panigrahi, R I Ganguly, G Srinivasa Rao | Mechanical Engineering | IOP Conf. Series: Materials Science and Engineering, | ||
| 16 | 2018-19 | Theoretical analysis of a Low GWP Refrigerants as a Drop in Substitute of R134a in a Domestic Refrigerator | Md. Hasheer Sk and K. Srinivas | Mechanical Engineering | Iranica Journal of Energy &Environment, | 2079-2115 | |
| 17 | 2018-19 | A Review on use of LM Based Aluminium Alloy in Automobile Components | K. Lakshmi Chaitanya, K. Srinivas, | Mechanical Engineering | American International Journal of Research in Science, Technology, Engineering & Mathematics | 2328-3491 | |
| 18 | 2018-19 | Effect of thermal aging on mechanical properites and fatigue behaviour of PP/HDPE thermoplastic polymer nanoclay composites | P HariPrasada Rao, H.RaviSankar, V.Chittaranjan Das | Mechanical Engineering | International Journal of Mechanical and Production Engineering research and development (IJMPERD) | 2249-6890 | https://www.scopus.com/sourceid/21100814505 |
| 19 | 2018-19 | Thermal aging influence on mechanical properties and fatigue behavior of acrylonitrile butadiene styrene thermoplastic polymer nanoclay composites | P Hari Prasada Rao, H.Ravisankar, V.Chittaranjan Das | Mechanical Engineering | International journal of Mechanical Engineering and Technology (IJMET) | 0976-6340 | https://www.scopus.com/sourceid/21100808402 |
| 20 | 2018-19 | Experimental Investigation on Characteristics of Di-Ci Engine Fueled with Shea Olein Biodiesel | K.B.Mutyalu, V.C.Das, K.Srinivasa Rao | Mechanical Engineering | International Journal of Mechanical Engineering and Technology (IJMET | 0976-6359 | https://www.scopus.com/sourceid/21100808402 |
| 21 | 2018-19 | Experimental Investigations on a Diesel Engine Fuelled with Biodiesel Blends and Tetra Hydrofuran as an Additive | Kiran Kumar Sureddy, Govind Nandipati | Mechanical Engineering | Jour of Adv Research in Dynamical & Control Systems | 1943-023X | https://www.scopus.com/sourceid/20500195215 |
| 22 | 2018-19 | Preheating of Biodiesel for the Improvement of the Performance Characteristics of Di Engine | Kiran Kumar Sureddy, N. Govind | Mechanical Engineering | American Journal of Mechanical Engineering | 2328-4102 2328-4110 | |
| 23 | 2018-19 | Comparitive Study Of Light Weight Materials In Automobiles | K. Aruna santhi,Dr .c.srinivas, | Mechanical Engineering | Journal of Advanced Research in Dynamical & Control Systems, | 1943-023X | https://www.scopus.com/sourceid/20500195215 |
| 24 | 2018-19 | Performance Apporach On Compact Heat Exchanger Using Different Fluid Blend Mixtures Variated At Different Temperature Levels | Balaji Naiak, Dr.C.Srinivas | Mechanical Engineering | Jour of Adv Research in Dynamical & Control Systems | 1943-023X | https://www.scopus.com/sourceid/20500195215 |
| 25 | 2018-19 | Cfd Analysis on Concentric Tube Heat Exchanger in Parallel and Counter Flow Direction | Sneha.H.Dhoria, E. Manoj Kumar2,I.V.S.Yeswanth3, Lakshmi Jayanti4 | Mechanical Engineering | Journal of Engineering Research and Application | 2248-9622 | |
| 26 | 2018-19 | Fabrication and Effect of Morphology and Mechanical Properties Of ABS/HDPE/PP Thermoplastic Nanocaly Composites | Hari Prasadarao Pydi1, V Chittaranjan Das2, H Ravisankar3 | Mechanical Engineering | Jour of Adv Research in Dynamical & Control Systems, | 1943-023X | https://www.scopus.com/sourceid/20500195215 |
| 27 | 2018-19 | computational fluid dynamics analysis of pressure effects in a hot cascade tyoe ranque - hilsch vortex tube | N.V.V.S.Sudheer | Mechanical Engineering | International Journal of Mechanical and Production Engineering Research and Development | 2249-6890 | https://www.scopus.com/sourceid/21100814505 |
| 28 | 2018-19 | computational fluid dynamics study on the effects of L/D RATIO IN A 2 stage hot cascade vortex tube | N.V.V.S.Sudheer | Mechanical Engineering | International journal of recent technology and engineering | 2277-3878 | https://www.scopus.com/sourceid/21100889873 |
| 29 | 2018-19 | Effect of insulations on cop in Vapor compression refrigeration system | N.V.V.S.Sudheer | Mechanical Engineering | International Journal of Mechanical Engineering and Technology | 0976-6340 | https://www.scopus.com/sourceid/21100808402 |
| 30 | 2018-19 | Experimental determination of optimum refrigerant insulation combination in a VCR system using taguchi method | N.V.V.S.Sudheer | Mechanical Engineering | International Journal of Mechanical and Production Engineering Research and Development | 2249-6890 | https://www.scopus.com/sourceid/21100814505 |
| 31 | 2018-19 | Fabrication and response of e glass epoxy based hybrid composites filled with CFA/CFACP | Dr.B.Ramgopal Reddy | Mechanical Engineering | International Journal of Engineering and Advanced Technology | 2249-8958 | https://www.scopus.com/sourceid/21100899502 |
| 32 | 2018-19 | Optimization of Tool wear and Surface Roughness in Turning Titanium (Ti-6Al-4V) Alloy; NFMQCF Technique | Dr.G.Chaitanya | Mechanical Engineering | I-Managers Journal on Mechanical Engineering | 2249-0744 | |
| 33 | 2018-19 | Multi-Objective Optimization of a Process Parameter in Turning of Titanium Alloy Using GRA, PCA and RSM Method | Dr.G.Chaitanya | Mechanical Engineering | I-Managers Journal on Mechanical Engineering | 2249-0744 | |
| 34 | 2018-19 | A Novel Approach of Turning on Titanium (Ti-6AL-4V) Alloy using NFGMT Coupled with GRA, PCA, and RSM | Siva koteswara rao Katta, Dr.G.Chaitanya, Dr. B Ravi Shankar, | Mechanical Engineering | I-Managers Journal on Mechanical Engineering | 2249-0744 | |
| 35 | 2018-19 | Selection and Optimization of Process Parameters of Friction Surfaced Deposits | Ravi Sekhar, Chittaranjan Das V, Govardhan D | Mechanical Engineering | Manufacturing Technology Today, | 0972-7396 | |
| 36 | 2018-19 | Numerical Simulation of Heat Transfer in Liquid Lithium Flow Through Elliptical Cylinder | Nagarjuna varma, Dr. N.Govind | Mechanical Engineering | Journal of Mechanical Engineering for Sustainable Development: State-of-the-Art Research, | ||
| 37 | 2018-19 | Comparative Study of Light Weight Materials in Automobiles | K.Arunasanthi, Dr.C.Srinivas, | Mechanical Engineering | Journal of Advanced Research in Dynamical & Control Systems, | 1943-023X | https://www.scopus.com/sourceid/20500195215 |
| 38 | 2018-19 | Performance Approach On Compact Heat Exchanger Using Different Fluid Blend Mixtures variated at Different Temperature Levels | M.BalajiNaiak, Dr.C.Srinivas, | Mechanical Engineering | Journal of Advanced Research in Dynamical & Control Systems, | 1943-023X | https://www.scopus.com/sourceid/20500195215 |
| 39 | 2018-19 | Effect of insulations on COP in Vapor compression Refrigeration System | P.Anusha, Dr.N.V.V.S.Sudheer | Mechanical Engineering | International Journal of Mechanical Engineering and Technology | 0976-6340 | https://www.scopus.com/sourceid/21100808402 |
| 40 | 2018-19 | Investigation on Mechanical Properties of AA6351/SiC and AA6351/SiC/Gr Composites Fabricated by Stir Casting Method | M.Vijaya, Dr.K.Srinivas, | Mechanical Engineering | International Journal of Recent Technology and Engineering | 2277-3878 | https://www.scopus.com/sourceid/21100889873 |
| 41 | 2018-19 | Assessment of Mechanical and Tribological properties of Aluminium Metal matrix composites: A Review | Sneha.H.Dhoria, Dr.V.Durga Prasada Rao, Dr.K.Venkata Subbaiah | Mechanical Engineering | International Journal of Multidisciplinary, | 2455-3085 | |
| 42 | 2018-19 | Performance analysis of alternative low GWP refrigerant mixtures as a direct substitute of HFC-134a in a Domestic Refrigerator using LSHX | Md.Hasheer shaik, Dr.K.Srinivas | Mechanical Engineering | International Journal of Innovative Technology and Exploring Engineering (IJITEE), | 2278-3075 | https://www.scopus.com/sourceid/21100889409 |
| 43 | 2018-19 | Simultaneous Effects Thermal Diffusion and Diffusion Thermo on MHD Non-Newtonian Casson Fluid Flow along a Vertically Inclined Plate in Presence of Free Convection and Joules Dissipation | Dr.D.V.V.KrishnaPrasad, G.S. Krishna Chaitanya, R.Srinivasa Raju, | Mechanical Engineering | Journal of Engineering and Applied Science | 1819-6608 | https://www.scopus.com/sourceid/21100200825 |
| 44 | 2018-19 | Wear behavioral assessment of Al-CSAp-MMCs using grey-fuzzy approach | Siva SankaraRaju, Dr.G.Srinivasa Rao, Chitrasen Samantra, | Mechanical Engineering | Measurement | ||
| 45 | 2018-19 | Double Diffusive Effects on Mixed Convection Casson Fluid Flow Past a Wavy Inclined Plate in Presence of Darcian Porous Medium | Dr.D.V.V.Krishna Prasad, G.S.Krishna Chaitanya, R. SrinivasaRaju, | Mechanical Engineering | Results in Engineering | ||
| 46 | 2018-19 | A Case Study of supply chain with third-party logistics and a centralized supply chain for a domestic pump supply chain, | T.V.S.R.K Prasad, Dr.K.Srinivas, Dr.C.Srinivas | Mechanical Engineering | Journal of Advanced Research in Dynamical & Control Systems (JARDS | 1943-023X | https://www.scopus.com/sourceid/20500195215 |
| 47 | 2018-19 | Topological Surface of H.S.S and Titanium31 using Micro Electro Discharge Machining | Jush Kumar Siddani, Dr.C.Srinivas | Mechanical Engineering | International Journal of Recent Technology and Engineering, | 2277-3878 | https://www.scopus.com/sourceid/21100889873 |
| 48 | 2018-19 | AHP and TOPSIS based selection of aluminium alloy for automobile panels | D.Swapna, Dr.Ch.Srinivasa Rao, Dr. D. Sameer Kumar, Dr.S.Radhika, | Mechanical Engineering | Journal of Mechanical and Energy Engineering | 2053-1591 | https://www.scopus.com/sourceid/21100432452 |
| 49 | 2018-19 | Optimization of Multiple performance characteristics of friction stir welding joint with Grey relational analysis | G. Harsha, J.P.Karthik, Dr.C.Tarasasanka, | Mechanical Engineering | International Journal of Research and Analytical Reviews | 2348-5138 | |
| 50 | 2017-18 | Analysis and Optimization of Alloy Wheel | Anusha. K and Tarasasanka C, | Mechanical Engineering | International Journal of Innovative Research in Science, Engineering and Technology | 2319-8753 | |
| 51 | 2017-18 | Assessment and comparison of different materials for alloy wheels using ANSYS | Anusha. K and Tarasasanka C, | Mechanical Engineering | Asian Journal of Science and Technology | 0976-3376 | |
| 52 | 2017-18 | Application of Taguchi techniques to study dry sliding wear behaviour of magnesium matrix composites reinforced with alumina Nano particles | Tarasasanka, C.and Ravindra, K. | Mechanical Engineering | Journal of Engineering Science & Technology | 1823-4690 | https://www.scopus.com/sourceid/18200156709 |
| 53 | 2017-18 | Low Level Material Handling Applications using GSM based Wireless Controlled Robot | Neha Krishna, S.Radhika, D.Swapna, | Mechanical Engineering | Journal of Mechanical Robotics | ||
| 54 | 2017-18 | Design and Optimization of Pressure Vessel using Real Coded Genetic Algorithm | M. Nishidhar Babu, Ch. Deva Raj, B. Muddu Krishna, Y. Kiran, P.Mastanrao | Mechanical Engineering | International Journal of Scientific & Engineering Research | 2347-3878 | |
| 55 | 2017-18 | Effect of Green Gram Husk Nanocellulose on Banana Fiber Composite | MounikaMovva&Dr.K.Ravindra | Mechanical Engineering | Journal Of Natural Fibers | 1544-0478 | https://www.scopus.com/sourceid/130154 |
| 56 | 2017-18 | Few Aspects in Hard Turning Process | B.Purna Chandra Sekhar, K.Srinivas, Dr.S.Radhika, | Mechanical Engineering | International Journal of Research | 2348-6848 | |
| 57 | 2017-18 | A selective survey of taguchi method used in hard turning process | B.Purna Chandra Sekhar, K.Srinivas, Dr.S.Radhika | Mechanical Engineering | International Journal of Advanced Research in Industrial Mechanics | 2289-7895 | |
| 58 | 2017-18 | Modelling and Performance Test Analysis of Cycloid Speed Reducer | M.Jaya Pradeep and S.Radhika | Mechanical Engineering | International Journal for Innovative Engineering and Management Research, | 2350-0557 | |
| 59 | 2017-18 | Effect of Chemical Treatment on Mechanical Properties of Kenaf and Jute Fiber Reinforced Polyester Composites | M. Srinivasa Rao, C. Srinivas and B. Ramgopal Reddy | Mechanical Engineering | International Journal for Modern Trends in Science and Technology (IJMTST), | 2455-3778 | |
| 60 | 2017-18 | Mechanical behaviour of A356 alloy reinforced with high strength alloy particulate metallic composites | Gopi Krishna Mallarapu, Praveen Kumar Kancharla, J B Rao and N R M R Bhargava | Mechanical Engineering | Materials Research Express | 2053-1591 | https://www.scopus.com/sourceid/21100432452 |
| 61 | 2017-18 | Statistical Analysis and Mathematical Modeling of Dry Sliding Wear Parameters of 2024 Aluminium Hybrid Composites Reinforced with fly ash and sic particles | Vijayabhaskar kurapati, RavindraKomineni& Srinivasan Sundarrajan | Mechanical Engineering | Transactions of the Indian institute of Metals | 0972-2815 | https://www.scopus.com/sourceid/12149 |
| 62 | 2017-18 | Thermal Analysis of Closed Loop Pulsating Heat Pipe | N.Santhi Sree, N.V.V.S. Sudheer & P. Bhramara | Mechanical Engineering | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) | 2249-6890 | https://www.scopus.com/sourceid/21100814505 |
| 63 | 2017-18 | Design Criteria for Hot Fluid Flowing in Inner Pipe of a Double Pipe Heat Exchanger | Suresh Babu Koppula, N.V.V.S.Sudheer, | Mechanical Engineering | IJETSR | 2394-3386 | |
| 64 | 2017-18 | Study on Various Parameters in the Design of Double Pie Heat Exchanger on Hot Fluid Side in Inner Pipe | Suresh Babu Koppula, N.V.V.S.Sudheer, | Mechanical Engineering | International Journal of Advanced Research in Science and Engineering | 2350-0328 | |
| 65 | 2017-18 | Enhancement of Microstructure and Mechanical Properties of Al-Alloy using Biological Quenching Medium | M.Maruthi Rao and N.V.V.S.Sudheer | Mechanical Engineering | The IUP Journal of Mechanical Engineering | 0974-6536 | |
| 66 | 2017-18 | Experimental Studies on Effect of Machining parameters on Burr Height during End Milling of Inconel 718 Super alloys, Engineering And Technology | Reddy Sreenivasulu, Shaik Hidayath Hussain, Raga Veera Vineeth, Raavi RamaKrishna, Vijay Dasari, Pappala Suresh | Mechanical Engineering | Engineering And Technology Journal | 2456-3358 | |
| 67 | 2017-18 | Influence of Zinc Oxide and Silicon Carbide Micro fillers on Impact Strength and Hardness in E-Glass/Polyester Composites: Fabrication and Testing, | Reddy Sreenivasulu | Mechanical Engineering | AKGEC International Journal of Technology | 0975-9514 | |
| 68 | 2017-18 | Influence of ZnO and SiC Micro Fillers on Mechanical Properties of E-Glass/Polyester Composite | B.Bhargavi and Reddy Sreenivasulu | Mechanical Engineering | International Journal of Engineering Science and Computing, | 2319-1163 | |
| 69 | 2017-18 | Modelling and Optimization of WEDM Parameters for Titanium (Ti6al4v) using Response Surface Methodology | K.Tirupalu and G Srinivasarao, | Mechanical Engineering | International Journal of Engineering Science and Computing | 2319-1163 | |
| 70 | 2017-18 | Comparitive study on mechanical and thermal behaviour of glass fiber reinforced epoxy based composites with Sic & Tio, | Jush Kumar Siddani , Dr. C. Srinivas, G. Moses Dayan | Mechanical Engineering | international journal of engineering sciences & research technology( IJESRT) | 2277-9655 | |
| 71 | 2017-18 | Design and Experimental Validation of Composite Pressure Vessel, | Mr. Jush Kumar. Siddani, Dr. C. Srinivas, Mr. L. Srinivas Naik, Mr. T. Chandra Sekar | Mechanical Engineering | International Journal of New Innovations in Engineering and Technology | 2319-6319 | |
| 72 | 2017-18 | Prediction of process parameters in turning of titanium alloys using response surface methodology | sivakoteswararao k, G.chaitanya | Mechanical Engineering | IJMPERD | 2249-6890 | https://www.scopus.com/sourceid/21100814505 |
| 73 | 2017-18 | Effect of alkaline treatment on mechanical properties of kenaf fiber reinforced polyester composite | Dr.B.Ramgopal | Mechanical Engineering | American Institute of Physics- AIP Conference Proceedings | ||
| 74 | 2017-18 | Investigations for optimal surface roughness and cutting force during turning titanium(grade 5) with response surface methodology | sivakoteswararao k, G.chaitanya | Mechanical Engineering | IJMPERD | 2320-2092 | |
| 75 | 2017-18 | Optimum technique for Investigations of machining parameters in titanium (grade5) alloy turning the use of carbide tip tools | sivakoteswararao k, G.chaitanya | Mechanical Engineering | AJMIE | 2575-6079 | |
| 76 | 2017-18 | Evaluation Of Surface Roughness On Mql Turned titanium (Ti-6Al-4V) alloy by RSM and Box - Cox transformation | sivakoteswararao k, G.chaitanya | Mechanical Engineering | JMSSE | 2348-8956 | |
| 77 | 2017-18 | Effect of chip morphology on machining titanium (Ti-6Al-4V) alloy with uncoated carbide inserts using response surface methodology | Siva Koteswara Rao K, G.Chaitanya | Mechanical Engineering | IJSRR | 2279-543X | |
| 78 | 2017-18 | Friction Surfacing Process Of Stainless Steel Alloys | S. Ravi Sekhar, V.Chittaranjan das | Mechanical Engineering | International Journal of Mechanical Engineering and Technology (IJMET) | Article ID: IJMET_08_07_069. | |
| 79 | 2017-18 | Characterization of Tool Steel M2 Friction Surfaced Desposits | S. Ravi Sekhar, V.Chittaranjan das | Mechanical Engineering | International Journal of Applied Engineering Research | 0973-4562 | https://www.scopus.com/sourceid/21100217234 |
| 80 | 2017-18 | Design And Thermal Analysis Of Al/Sic Mmcs For Connecting Rod | K.Nageswara rao, V.Chittaranjan das | Mechanical Engineering | International Journal of Applied Sciences, Engineering and Management | 2320-3439 | |
| 81 | 2017-18 | Mechanical Behaviour and Structure properties of LM 25/ Cu Particulate Reinforced Metallic Composites | M.Naga Swapna, V.Chittaranjan Das,, M.Gopi Krishna | Mechanical Engineering | JMES | 1942-2466 | https://www.scopus.com/sourceid/21100218107 |
| 82 | 2017-18 | Fabrication ,Characterization and Mechanical Behavior A356/Copper Particulate Reinforced Metallic Composites. | V.Chittaranjan das | Mechanical Engineering | Journal of materials and environmental Sciences | 2028-2508 | https://www.scopus.com/sourceid/21100223585 |
| 83 | 2017-18 | Experimental Investigation on Performance,Combustion Characteristics of Diesel Engine by using Sunflower Oil | S.Kiran Kumar, Dr. N. Govind | Mechanical Engineering | International Journal of Thermal Technologies | 2277-4114 | |
| 84 | 2017-18 | Performance ,Emission and Combustion Evaluation of Diesel Engine Using Methyl Esters of Sunflower Oil | S.Kiran Kumar, Dr. N. Govind | Mechanical Engineering | Journal of Mechanical Engineering and Developments | 1024-1752 | https://www.scopus.com/sourceid/20980 |
| 85 | 2017-18 | Experimental Investigations on a Diesel Engine Fueled with Bio Diesel Blends and Diethyle Ether as an additive | K.K Sureddy, Dr.NGovind | Mechanical Engineering | International Journal of I.C.Engines and Gas Turbines | 2582-290X | |
| 86 | 2017-18 | Optimization of machining parameters during drilling by Taguchi based design of experiments and validation by neural network | Reddy Sreenivasulu & Ch.Srinivasa Rao | Mechanical Engineering | Brazilian Journal of Operations & Production Management, | 2237-8960 | https://mjl.clarivate.com/search-results?issn=2237-8960 |
| 87 | 2017-18 | Optimization using evolutionary metaheurestic techniques :A brief review | Dr.S.Radhika | Mechanical Engineering | Brazilian Journal of Operations & Production Management, | 2237-8960 | https://mjl.clarivate.com/search-results?issn=2237-8960 |
| 88 | 2017-18 | Stability analysis of turning using a non linerar force feed model | Dr.K.Srinivas | Mechanical Engineering | ACST journal | 0974-4738 | |
| 89 | 2017-18 | Design integrating & Process in engineering to reduce production cycle time in development of product | Dr.K.Srinivas | Mechanical Engineering | International journal of engineering research and application | 2248-9622 | |
| 90 | 2017-18 | Investigation on Age hardening of Aluminium alloy using biological quenchants | N.V.V.S.Sudheer | Mechanical Engineering | IJERMCE | 2456-1290 | |
| 91 | 2017-18 | Experimental investigation on the mechanical properties of AA with Different Quenching media | N.V.V.S.Sudheer | Mechanical Engineering | IJRASET, | 2321-9653 | |
| 92 | 2017-18 | Evaluation of mechanical properties of AA Quenched in natural biological Fluid | N.V.V.S.Sudheer | Mechanical Engineering | International Journal Of Chem Tech Research | 0974-4290 | https://www.scopus.com/sourceid/19700175055 |
| 93 | 2017-18 | Analysis on design considerations for a pipe in pipe heat exchanger | N.V.V.S.Sudheer | Mechanical Engineering | journal of thermal engineering and technology | ||
| 94 | 2017-18 | Assessment of tribological performance of coconut shell ash particle reinforced Al-Si-Fe composites using Grey-Fuzzy approach | Dr.G.S.Rao | Mechanical Engineering | Tribology in Engineering | ||
| 95 | 2017-18 | Investgation of tribological behavior of a novel hybrid composite prepared with Al-cocount shell ash mixed with graphite | Dr.G.S.Rao | Mechanical Engineering | Metallurgical and Materials Transactions | 1073-5623 | https://www.scopus.com/sourceid/27356 |
| 96 | 2017-18 | Estimation of tribological performance of Al-CSA composites using RSM-GRG approach | Dr.G.S.Rao | Mechanical Engineering | VSRDIJMCAPE | 2249-8303 | |
| 97 | 2016-17 | Tribological properties of Aluminium Metal Matrix Composites (AA7075 Reinforced with Titanium Carbide (TiC) Particles | V. Ramakoteswara Rao, N.Ramanaiah and M.M.M.Sarcar, | Mechanical Engineering | International Journal of Advanced Science and Technology | 2005-4238 | https://www.scopus.com/sourceid/21100829147 |
| 98 | 2016-17 | Investigation of Mechanical Properties of Al356 Metal Matrix Composites | J.P.Karthik | Mechanical Engineering | International Journal of Advanced Design and Manufacturing Technology, | 2252-0406 | |
| 99 | 2016-17 | Design and Optimization of Metal Matrix Composite (MMC'S) Spur Gear | J.P.Karthik | Mechanical Engineering | journal Trends in Machine design | 2455-3352 | |
| 100 | 2016-17 | Design and Optimization of Locomotive Suspension System Using Ant Colony Optimization | B. Ramgopal Reddy,C.Sailaja | Mechanical Engineering | International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), | 2319-8753 | |
| 101 | 2016-17 | Fabrication and Friction Stir Welding of Aluminium SiC metal matrix composites | Y.N.V.SaiRam ,Sk.Kamaluddin | Mechanical Engineering | International Journal of Advanced Science and Technology | 2005-4238 | https://www.scopus.com/sourceid/21100829147 |
| 102 | 2016-17 | Sliding Wear Behavior of High Velocity Oxy-Fuel Sprayed WC-CO Coatings | V. Ramakoteswara Rao,.prof. N.Ramanaiah ,M.M.M.Sarcar | Mechanical Engineering | Journal of Materials Research and Technology, | 2238-7854 | https://www.scopus.com/sourceid/21100383742 |
| 103 | 2016-17 | Mechanical and Tribological properties of AA7075 - TiC metal matrix composites under heat-treated (T6) and cast conditions | . Ramakoteswara Rao, N.Ramanaiah and M.M.M.Sarcar | Mechanical Engineering | Jordan Journal of Mechanical and Industrial Engineering, | 1995-6665 | https://www.scopus.com/sourceid/20000195025 |
| 104 | 2016-17 | Optimization of volumetric wear rate of AA7075-TiC metal matrix composite by using taguchi technique | Tara Sasanka C, Dr. Ravindra K | Mechanical Engineering | Trends in Mechanical Engineering & Technology | 2231-1793 | |
| 105 | 2016-17 | Analysis and Characterization of Tensile Property of Mg MMC using ANSYS | Reddy Sreenivasulu | Mechanical Engineering | Independent Journal of Management & Production | 2236-269X | https://mjl.clarivate.com/search-results?issn=2236-269X |
| 106 | 2016-17 | Taguchi based optimization for surface roughness and chip thickness during end milling process on aluminium 6351-T6 alloy | Reddy Sreenivasulu | Mechanical Engineering | International Journal of Lean Thinking | 2146-0337 | |
| 107 | 2016-17 | Prediction of burr size in Drilling operation of AL 2014 Alloy using Taguchi Design Method | Goteti Chaitanya and Reddy Sreenivasulu | Mechanical Engineering | International Journal of Lean Thinking | 2146-0337 | |
| 108 | 2016-17 | Genetic Algorithm Based Optimization of a two link Planar Robot Manipulator | D. Sameer Kumar, K.N.S. Suman , P. Rohini Kumar | Mechanical Engineering | International Journal of Advanced Science and Technology(IJAST) | 2005-4238 | https://www.scopus.com/sourceid/21100829147 |
| 109 | 2016-17 | A Study on Electroless Deposition of Nickel on Nano Alumina Powder Under Different Sensitization Conditions | Raffi Mohammed, B. Ramgopal Reddy et al. | Mechanical Engineering | Journal of Chemical and Pharmaceutical Sciences | 0974-2115 | https://www.scopus.com/sourceid/19700201516 |
| 110 | 2016-17 | Mechanical characterization & TOPSIS Ranking of Glass Fiber Reinforced particulate filled Epoxy based Hybrid Composites | Sneha. H. Dhoria, Dr. K. Srinivas, M. Vijaya, T.Yamini | Mechanical Engineering | journal of in the journal of thin films coating science technology and applications | 2455-3344 | |
| 111 | 2016-17 | Synthesis Characterization and Deformation Studies of Blast Furnace Slag Particles Reinforced Aa2024 Composite | Sameer Kumar D., et al. | Mechanical Engineering | Journal of Magnesium and Alloys [ELSEVIER] | 2213-9567 | https://www.scopus.com/sourceid/21100461936 |
| 112 | 2016-17 | Microstructure, mechanical response and fractography of AZ91E/Al2O3 (p) nano composite fabricated by semi solid stir casting method | Sneha. H. Dhoria,B.Sandeep, G.Narendra Santosh Kumar, M.Srivatsava | Mechanical Engineering | International Journal of Engineering Trends and Technology (IJETT | 2231-5381 | |
| 113 | 2016-17 | Design of Back stopper Mechanism for Automobiles, | Y.N.V.Sairam and K.Hariprasad, | Mechanical Engineering | International Journal of Research | 2348-6848 | |
| 114 | 2016-17 | Fabrication and Characterization of AA2024 Composites | T.V.S.R.K Prasad,Kolla.Srinivas,C.Srinivas | Mechanical Engineering | SSRG International of mechanical engineering | 2348-8360 | |
| 115 | 2016-17 | supply chain management: Modelling and algorithms: a review | K.Lakshmi Chaitanya, Kolla.Srinivas | Mechanical Engineering | Trends in mechanicalengineering & technology | 2231-1793 | |
| 116 | 2016-17 | Crash and Vibrational analysis of car body | K.Lakshmi Chaitanya, Kolla.Srinivas | Mechanical Engineering | Trends in mechanicalengineering & technology | 2231-1793 | |
| 117 | 2015-16 | Effect of Process Parameters on Mechanical Properties of Friction Stir Welding - A Review | B.Supraja, Dr. B.Ram Gopal Reddy, | Mechanical Engineering | International Journal of Engineering Technology, Management and Applied Sciences (IJETMAS | 2349-4476 | |
| 118 | 2015-16 | Effect of Process Parameters on Mechanical Properties of Friction Stir Welding - A Review | B.Sailaja, Dr. B.Ram Gopal Reddy | Mechanical Engineering | International Journal of Innovative Research in Science, Engineering and Technology(IJIRSET) | ISSN (Online): 2319-8753/ISSN (Print): 2347-6710 | |
| 119 | 2015-16 | Fatigue Testing of Continuous GFRP Composites Using Digital Image Correlation (DIC) Technique a Review | M. Lakshmi Aparna, Dr.G. Chaitanya,Assoc Prof., K.Srinivas, Professor , Jetti Appa Rao | Mechanical Engineering | journal of ELSVIER Materials Today | 2214-7853 | https://www.scopus.com/sourceid/21100370037 |
| 120 | 2015-16 | Solar-electric hybrid eco-friendly quike | Reddy Sreenivasulu, Asst.Prof. and Dr. G.Chaitanya, Assoc.Prof | Mechanical Engineering | AKGEC International Journal of Engineering and Technology | 0975-9514 | |
| 121 | 2015-16 | Design and Vibration mode analysis of a crankshaft for a Four stroke single cylinder petrol engine | A. Babi Reddy and Reddy Sreenivasulu, Asst.Professor | Mechanical Engineering | AKGEC International Journal of Engineering and Technology | 0975-9514 | |
| 122 | 2015-16 | Analysis of Non-circular members subjected to twisting loads: A finite difference approach | Dr.G.Chaitanya and Reddy Sreenivasulu | Mechanical Engineering | The Independent Journal of Management & Production | 2236-269X | https://mjl.clarivate.com/search-results?issn=2236-269X |
| 123 | 2015-16 | Performance of 2-stage PVC hot Cascade Type Ranque-Hilsch Vortex Tube | R.Madhu Kumar, Dr.N.V.V.S.Sudheer, Assoc Prof | Mechanical Engineering | International Journal of Engineering Science & Management Research | 2349-6193 | |
| 124 | 2015-16 | Effect of Refrigerated air and Oxidizing Flame in Turning of Aluminium Metal Matrix Composite | Dr.N.V.V.S.Sudheer,Assoc Prof | Mechanical Engineering | BLB- International Journal of Science and Technology | 2277-8616 | https://www.scopus.com/sourceid/21100894501 |
| 125 | 2015-16 | Few Aspects in Deep Drawing Process | Ms. S.Radhika, Asst.Prof., Srinivasa Rao.Ch, D.Swapna ,Asst.Prof | Mechanical Engineering | Journal of Materials & Metallurgical Engineering | 2231-3818 | |
| 126 | 2015-16 | Modelling Of Cutting Speed For AISI 52100 Steel In Wedm By Design Of Experiments | Dr.G.Srinivasa Rao | Mechanical Engineering | BLB International Journal of Science and Technology | 2277-8616 | https://www.scopus.com/sourceid/21100894501 |
| 127 | 2015-16 | Optimization Of Machinability Properties On Aluminium Metal Matrix Composite Prepared By In-Situ Ceramic Mixture Using Coconut Shell Ash- Taguchi Approach | Dr.G.Srinivasa Rao | Mechanical Engineering | International Journal of Conception on Mechanical and Civil Engineering | 2357-2752 | |
| 128 | 2015-16 | Modeling And Optimization of Tool Parameters In The Presence of Variable Process Conditions Using Taguchi Robust Design | Dr.G.Srinivasa Rao | Mechanical Engineering | Journal of Machining and Forming Technologies | 1947436 | |
| 129 | 2015-16 | Integrated Production- Inventory - Distribution Optimization in a Multi-Echelon Supply Chain | Dr.C.Srinivas | Mechanical Engineering | journal Manufacturing Technology Today | ||
| 130 | 2015-16 | Experimental Investigation on Performance of Diesel Engine by Using Fish Oil And Mahua Oil | Mr.K.Balaprasad, V.Tarachand Asst.Professors | Mechanical Engineering | Journal of Sustainable Manufacturing and Renewable Energy | 2153-6821 | |
| 131 | 2015-16 | Development of Software Using Matlab for Design Optimization of Brake for Minibike | Dr. N. Govind ,Assoc Prof, Anil Kumar G, Prof. Ravindra K ,Prof. V.Anand Kumar | Mechanical Engineering | IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) | 2278-1684 | |
| 132 | 2015-16 | Implementation of VIKOR Method for Selection of Magnesium Alloy to Suit Automotive Applications | Mr.C. Tara Sasanka ,Asst.Prof. and K. Ravindra,Prof | Mechanical Engineering | International Journal of Advanced Science and Technology | 2349-5359 | |
| 133 | 2015-16 | Tribological Properties of Aluminium Metal Matrix Composites (AA7075 Reinforced with Titanium Carbide (TiC) Particles) | Asst.Prof. V.Ramakoteswara Rao, N.Ramanaiah and M.M.M.Sarcar | Mechanical Engineering | International Journal of Advanced Science and Technology | 2349-5359 | |
| 134 | 2015-16 | A Review on Properties of Aluminium Based Metal Matrix Composites via Stir Casting | V.Ramakoteswara Rao, and J.Rangaraya Chowdary | Mechanical Engineering | International Journal of Scientific & Engineering Research | 2229-5518 | |
| 135 | 2015-16 | Tribological Properties of Aluminium Metal Matrix Composites (AA7075 Reinforced with Titanium Carbide (TiC) Particles) | V.RamakoteswaraRao, N.Ramanaiah and M.M.M.Sarcar | Mechanical Engineering | International Journal of Applied Science and Engineering | 2308-5088 | |
| 136 | 2015-16 | Integrated production - Inventory-distribution optimization in a multi- echelon supply chain | T.V.S.R.K Prasad,Prof.K.Srinivas and Assoc.Prof.Dr.C.Srinivas | Mechanical Engineering | Manufacturing Technology Today | 0972-7396 | |
| 137 | 2015-16 | Decentralized Production Planning in Multi-echelon Supply Chain Network using Autonomous Agents | T.V.S.R.K Prasad,Prof.K.Srinivas and Assoc.Prof.Dr.C.Srinivas | Mechanical Engineering | Proceedings of the International Conference on Trends in the Industrial and Mechanical Engineering | ||
| 138 | 2015-16 | Design of Machine Layout in Flexible Manufacturing Systems | Assoc.Prof.Dr.C.Srinivas | Mechanical Engineering | International Journal of Trend in Research and Development | 2394-9333 | |
| 139 | 2015-16 | Use of the grey relational analysis to determine optimum drilling cutting parameters of Al-6063th multi performance characteristics | M.N.S.Mounish and Assoc.Prof.Dr.C.Srinivas | Mechanical Engineering | International Journal of Trend in Research and Development | 2394-9333 | |
| 140 | 2015-16 | A Review on Mechanical and Tribological Properties of Metal matrix Composites | Asst.Prof. V.Ramakoteswara Rao, N.Ramanaiah and M.M.M.Sarcar | Mechanical Engineering | Journal of Polymer & Composites | 2321–2810 | |
| 141 | 2015-16 | Optimization of Surface Roughness, circularity deviation and selection of different Aluminium alloys during drilling for automotive and aerospace industry | Asst.Prof. Reddy Sreenivasulu and Ch.Srinivasa Rao | Mechanical Engineering | Independent Journal of Management & Production | 2236-269X | https://mjl.clarivate.com/search-results?issn=2236-269X |
| 142 | 2015-16 | Overview on Burr Formation, Simulation and Experimental Investigation of Burr size based on Taguchi Design of Experiments during Drilling of Alluminium 7075 Alloy | Asst.Prof. Reddy Sreenivasulu and Ch. SrinivasaRao | Mechanical Engineering | AKGEC International Journal of Engineering and Technology | 0975-9514 | |
| 143 | 2015-16 | Design Optimization of IC engine Rocker-arm using Taguchi based Design of experiments | Assoc.Prof.Dr. G.Chaitanya ,Asst.Prof. Reddy Sreenivasulu and Ch SrinivasaRao | Mechanical Engineering | AKGEC International Journal of Engineering and Technology | 0975-9514 | |
| 144 | 2015-16 | Thermodynamic Analysis of Air Cooled Gas Turbine used in Marine Applications | Assoc.Prof.K.Balaprasad,Asst.Prof. V. Tara Chand, I. N. Niranjan Kumar,Prof.K. Ravindra and V. Naga Bhushana Rao | Mechanical Engineering | International Journal of Thermal Technologies | 2277-4114 | |
| 145 | 2015-16 | Modeling and Simulation of Nano and Multiscale Composites | Assoc.Prof.Dr.B.Ramgopal Reddy and K.Ramji | Mechanical Engineering | International Journal of Hybrid Information Technology | 1738-9968 | https://www.scopus.com/sourceid/21100853982 |
| 146 | 2015-16 | Effect of Epoxy modifiers (Bagasse fiber / Bagasse ash / Coal powder /Coal Fly ash) on mechanical properties of Epoxy / Glass fiber hybrid composites | Assoc.Prof.Dr.B.Ramgopal Reddy and Raffi Mohammed | Mechanical Engineering | International Journal of Applied Engineering Research | 0973-9769 | https://www.scopus.com/sourceid/21100217234 |
| 147 | 2015-16 | Design of Ventilation and Air Conditioning for 50 Ton Bollard Pull Utility Tug Built for Indian Navy | Asst.Prof. K. Lakshmi Chaitanya and Prof. K. Srinivas, K. Jagadish Chandra Bose | Mechanical Engineering | Journal of Refrigeration and Air Conditioning, Heating and Ventilation | 2394-1952 | |
| 148 | 2015-16 | Modeling of Surface Roughness for AISI 52100 steel in WEDM by design of experiments | Prof. Srinivasarao.G, Suneel.D, Santhi priya.P | Mechanical Engineering | International Journal of Engineering Research and technology | 2278-0181 | |
| 149 | 2015-16 | Optimization of machining parameters for EDM operations based on central composite design and desirability approach | Prof.Chittaranjan Das. V | Mechanical Engineering | International Journal of Advanced Science | 2005-4238 | https://www.scopus.com/sourceid/21100829147 |
| 150 | 2015-16 | Response surface Methodology and Desirability Approach to Optimize EDM Parameters | Prof.Chittaranjan Das. V | Mechanical Engineering | International Journal of Hybrid Information Technology | 1738-9968 | https://www.scopus.com/sourceid/21100853982 |
| 151 | 2015-16 | Investigation on Influence of drilling parameters on Thrust force and Torque - Based on Design of Experiments | Reddy Sreenivasulu Asst.Prof | Mechanical Engineering | International Journal of Scientific & Engineering Research | 2229-5518 | |
| 152 | 2015-16 | A Review on Effect of Adding Additives and Nano Additives on Thermal properties of Gear Box Lubrication | Dr.N.V.V.S.Sudheer Assoc..Prof | Mechanical Engineering | International Journal of Applied Research | 2394-5869 | |
| 153 | 2015-16 | Enhancement of Microstructure and Mechanical Properties of Al Alloys - Review | Dr.N.V.V.S.Sudheer Assoc..Prof and M.Maruthi Raoand | Mechanical Engineering | International Journal of Science, Engineering and Technology Research (IJSETR) | 2278-7798 | |
| 154 | 2015-16 | Possibility of Using Refrigerant Blends In the Existing Refrigerator & AC Systems: A Review | Dr.N.V.V.S.Sudheer Assoc..Prof. | Mechanical Engineering | IOSR Journal of Mechanical and Civil Engineering | 2278-1684 | |
| 155 | 2015-16 | Performance Analysis of A Single Cylinder Four stroke Diesel Engine Using Sunflower Oil as a Bio-Diesel Blend | Anusha Peyyala, Dr.N.V.V.S.Sudheer | Mechanical Engineering | International Journal of Innovations in Engineering and Technology | 2319-1058 | |
| 156 | 2015-16 | Integrated Production - Inventory-distribution Optimization in a Multi- echelon Supply Chain | T.V.S.R.K Prasad, K.Srinivas and Dr.C.Srinivas | Mechanical Engineering | Proceedings of the International Conference on industrial Engineering | ||
| 157 | 2015-16 | Prediction of surface roughness in end milling operation of Aluminium 6351-T6 alloy using Taguchi methodology | Mr. Reddy Sreenivasulu Asst.Prof | Mechanical Engineering | National Conference on Design and Manufacturing for Product Life Cycle | ||
| 158 | 2015-16 | Influence of drilling parameters on thrust force and torque during drilling of Aluminium 7075 Alloy | Mr. Reddy Sreenivasulu Asst.Prof | Mechanical Engineering | National Conference on Recent Trends in Mechanical Engineering | ||
| 159 | 2014-15 | Selection of Magnesium Alloy by MADM Methods for Automobile Wheels | D.Sameerkumar , Asst.Prof. and K.N.S. Suman | Mechanical Engineering | International Journal of Engineering and Manufacturing (IJEM | 2305-3631 2306-5982 | |
| 160 | 2014-15 | Failure mechanisms in turbine blades of a gas turbine Engine - an overview | V. Naga Bhushana Rao, I.N.Niranjan Kumar and K. Bala Prasad , Assoc. Prof., N.Madhulata, Naresh Gurajarapu | Mechanical Engineering | International Journal of Engineering Research and Development | 2278-0181 | |
| 161 | 2014-15 | Wear behaviour of novel Al based composite reinforced with ceramic composite (Al2O3-SiC-C) developed from colliery shale material | Prof.G. Srinivasarao, S.B.VenkataSiva , R.I. Ganguly, and K.L.Sahoo | Mechanical Engineering | International Journal of Tribology, | 0022-2305 | https://www.scopus.com/sourceid/30218 |
| 162 | 2014-15 | Sensitivity Analysis to Determine the Parameters of Genetic Algorithm for Machine Layout | Dr. C. Srinivas, Dr. B. Ramgopal Reddy, Prof. K. Ramji and Dr. R . Naveen , | Mechanical Engineering | Procedia Materials Science (ELSEVIER) | 2211-8128 | |
| 163 | 2014-15 | Effect of Carburizing Flame and Oxidizing Flame on Surface Roughness in Turning of Aluminium Metal Matrix Composite and Differential Evolution Optimization of Process Parameters | Dr. N.V.V.S.Sudheer, Prof. K.Kartheeka Pavan | Mechanical Engineering | Journal of Procedia Materials Science, Elsevier | 2211-8128 | Title discontinued as of 2017 |
| 164 | 2014-15 | Effect of Carburizing Flame and Oxidizing Flame on Surface Roughness in Turning of Aluminium Metal Matrix Composite | N.V.V.S.Sudheer, K.V.J.Rao and N.Rajesh | Mechanical Engineering | Journal of Association of Engineers | 0368-1106 | |
| 165 | 2014-15 | Enhancement of Heat Transfer by Nanofluids in Solar Collectors | Dr.N.V.V.S.Sudheer, Santhisree Nerella, and Dr.P.Bhramara | Mechanical Engineering | International Journal of Innovations in Engineering and Technology, | 2319-1058 | |
| 166 | 2014-15 | Fabrication and investigation on properties of TIC reinforced Al7075 metal matrix composites | .Ramakoteswara Rao , N Ramanaiah, M.M.M Sarcar | Mechanical Engineering | Applied mechanics and materials | 1662-7482 | |
| 167 | 2014-15 | Joining of dissimilar alloy sheets (Al 6063 & AISI 304) during resistance spot welding process: a feasibility study for automotive industry | Reddy Sreenivasulu | Mechanical Engineering | Independent Journal of Management & Production | 2236-269X | https://mjl.clarivate.com/search-results?issn=2236-269X |
| 168 | 2014-15 | Study on Processing and Mechanical Properties of Nano SiCp reinforced AA7075 | Dr. N. Govind , Prof. Dr. K. Ravindra , Dr. Nageswara Rao was | Mechanical Engineering | International Journal of Engineering Science (IJES) | 2319-1813 | |
| 169 | 2014-15 | Optimization of Machining Parameters and Material Selection during Drilling of Aluminium Alloys-Review | Dr.G.Chaitanya,Reddy Sreenivasulu | Mechanical Engineering | AKGEC International Journal of Technology | 0975-9514 | |
| 170 | 2014-15 | Magnesium and Its Alloys in Automotive Applications - A Review | D.Sameer Kumar, C.Tara Sasanka, Dr.K.Ravindra and K.N.S.Suman | Mechanical Engineering | American Journal of Material Science and Technology | 2163-1239 | |
| 171 | 2014-15 | Design Optimization of Tripod Truss: SLP Approach | Reddy Sreenivasulu | Mechanical Engineering | Independent Journal of Management & Production | 2236-269X | https://mjl.clarivate.com/search-results?issn=2236-269X |
| 172 | 2014-15 | Optimization of Burr size, Surface Roughness and Circularity Deviation of Aluminium Alloy during Drilling using Taguchi Design Method, ANOVA and ANN | Reddy Sreenivasulu | Mechanical Engineering | Independent Journal of Management & Production | 2236-269X | https://mjl.clarivate.com/search-results?issn=2236-269X |
| 173 | 2014-15 | Tool Condition Monitoring in Hard Turning by using Acoustic Mission?a Review | Dr.Kolla Srinivas, Professor, D.Kondal Rao, Asst. Prof,Ch.Devaraj | Mechanical Engineering | International Journal of Science, Engineering And Technology | 2395-4752 2348-4098 | |
| 174 | 2014-15 | Turbine Blade Cascade Heat Transfer Analysis Using CFD - A Review | Dr.Kolla Srinivas, Md.Hasheer.sk, | Mechanical Engineering | International Journal of Science, | 2349-784x | |
| 175 | 2014-15 | Powder Mixed Dielectric in EDM - An overview | B.Purna Chandra Sekhar, S. Radhika, Asst.Prof, D.Sameer Kumar | Mechanical Engineering | International Journal of Research | 2348-6848 | |
| 176 | 2014-15 | MADM Technique Integrated with Grey- based Taguchi method for Selection of Aluminum alloys to minimize deburring cost during Drilling | Dr.G.Chaitanya,Reddy Sreenivasulu | Mechanical Engineering | AKGEC | 0975-9514 | |
| 177 | 2014-15 | Assessment and Comparison of Fatigue Life for Heavy Truck Wheel Rim Under Fully Reverse Loading for Aluminum Alloys | J.Purushottam Karthik,J.Rangaraya | Mechanical Engineering | International Journal of Applied Science and Engineering | 2308-5088 | |
| 178 | 2014-15 | Cell Formation by SLCA Technique Using Various Similarity Coefficients | Dr.D.V.V.Krishna Prasad | Mechanical Engineering | International journal of innovative Science | 1757-2223 | https://www.scopus.com/sourceid/19700188275 |
| 179 | 2014-15 | Design of a Compressed Air Vehicle | S. Radhika,Asst.Prof, D. Swapna,P. Manikanta, Sk. Sunain | Mechanical Engineering | journal of Refrigeration, Air Conditioning, Heating and Ventilation | 2394-1952 | |
| 180 | 2014-15 | Fabrication and Characterization of 2024 Aluminum - High Entropy Alloy Composites | Dr.K.Praveen Kumar, M.Gopi Krishna, J.Babu Rao, N.R.M.R.Bhargava | Mechanical Engineering | Journal of Alloys and Compounds, ELSVIER | 0925-8388 | https://mjl.clarivate.com/search-results?issn=0925-8388 |
| 181 | 2014-15 | Application of Taguchi Method to Study the Influence of Cutting Parameters on the Surface Hardness in Turning Inconel 718 | Dr.C.Srinivas,Ch. Devaraj,.Rahul Jetson, Sk.Basheer Ahmed, P.Mastan Rao | Mechanical Engineering | International Journal of Scientific & Engineering Research (IJSER) | 2229-5518 | |
| 182 | 2014-15 | Tensile & Fracture Behavior of Al-Si Cp Metal Matrix Composites | Jushkumar Siddani, Dr.C.Srinvas, | Mechanical Engineering | International Journal of Innovation in Engineering and Technology (IJIET) | 2319-1058 | |
| 183 | 2014-15 | Quantitative studies on wear behavior of Al-(Al2O3-SiC-C) Composite prepared with in situ Ceramic composite developed from colliery waste | S.B.Venkata Siva, R.I.Ganguly, Dr.G.Srinivasa Rao and K.L.Sahoo | Mechanical Engineering | Journal of Engineering Tribology | 1350-6501 | https://www.scopus.com/sourceid/20410 |